Interface M-NET - Mitsubishi - MAC-334IF-E

Specifications of the MAC-334IF-e system control interface for internal units of the M
series
- Allows internal M Series units to communicate with the City Multi® control network via M-NET
- Ambient temperature adjustment at 0.5 ° C (1 ° F) for M-NET connection.

- Dual Auto Mode configuration configured by DIP Switch

- External heater on/off based on the defined temperature and environment

- Provides two outputs to allow the following control scenarios:
NOTE: External power supply of 12 VCC
is required
- equipment status and error

- Equipment status and auxiliary heat source

- equipment status and humidifier control

- Auxiliary heat source and humidifier control

- Provides an input to allow the remote control/off of the internal unit (3 -wire plug adapter included)

-Allows internal M Series units to connect to the CN105 interface via CN505 on MAC-334IF-e by using other functions of the MAC-334IF
NOTE: External power supply of 12 VCC
is required
- Note: The CN105 interfaces that can be used are the wireless interface (1 or 2) or mhk1

- Allows internal M series units to connect to a remote control MA

- Operating conditions: Internal only (32 ° F to 104 ° F [0 ° C to 40 ° C], without condensation)

- Internal unit connection cable: dedicated CN105 cable included

-To have a MAC-334if-e in the same group as a MAC-333IF-e, the DIP 502-7 key must be configured as on